Lavalier_MX150_1

MX150 Subminiature Lavalier Microphone

The Shure Microflex® MX150 is a professional subminiature electret condenser lavalier microphone for use in speech and other applications requiring low-profile, discreet placement.

Best suited to: Speech

Condenser Omnidirectional Cardioid

The Shure Microflex® MX150 is a professional subminiature electret condenser lavalier microphone ideal for use in speech and other applications requiring low profile, discreet placement. Available with cardioid or omnidirectional patterns, the MX150 provides uncompromised sound quality and high reliability with minimal visibility for use in television broadcasting, corporate lectures, A/V teleconferencing, House of Worship, and sound reinforcement. Commshield® Technology offers superior RF immunity from cellular devices and digital bodypack transmitters. Each microphone is supplied with a snap-fit foam windscreen to minimize wind noise and a multi-position tie clip with integrated cable management to minimize cable handling noise.

Features
  • Available in Cardioid or Omnidirectional polar patterns and TQG (for use in Shure bodypacks) or wired XLR variations
  • CommShield® Technology guards against interference from Cellular RF devices and digital
  • Terminated with TQG/TA4F connector for direct connectivity to Shure wireless bodypack transmitters
  • Matte Black, Sleek, low-profile, design for inconspicuous placement
  • Multi-position tie clip allows for a variety of placement options and features an integrated cable management system for convenient cable dress with minimized handling noise.
  • Kevlar®-reinforced soft-flex cable design further reduces handling noise while providing superior flexibility for routing and placement
  • User-changeable equalization caps for response shaping (omnidirectional only)
  • Snap-fit, concise windscreen provides protection from plosives and wind noise with minimal visibility
  • Legendary Shure quality, ruggedness, and reliability
   

  • Technical Data

     

    Transducer Type Condenser
    Polar Pattern Omnidirectional, Cardioid
    Frequency Response 20 Hz – 20000 KHz
       
      MX150/C MX150/0
    Transducer Type Electret Condenser
    Polar Pattern Cardioid Omnidirectional
    Frequency Response 20 to 20,000 Hz
    Output Impedance TQG: N/A, XLR: 165.5Ω TQG: N/A, XLR: 165.0Ω
    Sensitivity
    open circuit voltage, @ 1 kHz, typical         		TQG: -51.0 dBV/Pa (3.0 mV)
    XLR: -39.0 dBV/Pa (11.0 mV)         		TQG: -46.5 dBV/Pa (4.5 mV)
    XLR: -34.5 dBV/Pa (19.0 mV)
    Maximum SPL
    1 kHz at 1% THD (1000Ω load)         		TQG: 147.5 dB SPL
    XLR: 129.5 dB SPL         		TQG: 143.0 dB SPL
    XLR: 125.0 dB SPL
    Signal-To-Noise Ratio TQG: 57.5 dB
    XLR: 57.0 dB         		TQG: 60.0 dB
    XLR: 59.5 dB
    Dynamic Range @ 1 kHz
    (1000Ω load)         		TQG: 111.0 dB SPL
    XLR: 92.5 dB SPL         		TQG: 109.0 dB SPL
    XLR: 90.5 dB SPL
    Self Noise
    equivalent SPL, A-weighted, typical         		TQG: 36.5 dB
    XLR: 37.0 dB         		TQG: 34.0 dB
    XLR: 34.5 dB
    Operating Temperature Range -18°C (0°F) to 57°C (135°F)
    Polarity TQG: Positive pressure on diaphragm produces positive voltage on pin 3 with re­spect to pin 1
    XLR: Positive pressure on diaphragm produces positive voltage on pin 2 with re­spect to pin 3
    Power Requirements TQG: 5 V DC (0.04 – 0.18 mA)
    XLR: 11-52 V DC phantom power (IEC-61938), < 2.2 mA
    Weight TQG: 21 g (0.7 oz.)
    XLR: 121 g (4.3 oz.)
         

  • Downloads

    PDF MX150 User Guide
    English