mixers_drf22_1

DFR22 Audio Processor

Two Channels. A Powerful Processor. The Shure DFR has quickly become the industry standard for effective feedback reduction. The DFR22 builds on that reputation to provide an affordable full-featured 2×2 audio processor with drag-and-drop software. It's much more than feedbackreduction. For many jobs, it's the only audio processor you'll need.

The Shure DFR Difference. Featuring enhancements to a patented Adaptive Notch Filter Algorithm, the DFR22 includes single-channel and stereo processing blocks with up to 16 precision notch filters that automatically seek out and reduce feedback. With widths between 1/10 and 1/70 of an octave, these adaptive filters affect only the problem frequencies, maximizing system stability and sound integrity. In addition, Auto Clear mode removes dynamic filters and restores the DFR to your ideally-tuned configuration after a specified amount of time.

Processing blocks in the DFR22 can be applied in any order, to any input or output. You can also link processors for more efficient global control. Copy and paste processing blocks to any input or output to duplicate processors across multiple channels.

With the DFR22, you can design the entire system, save it to disk, and load it at the job site for easy setup. The DFR22 also allows real-time design changes, so you can add, subtract, or change processing blocks as you tune the system. It makes setup a breeze. And ensures that you get the best possible customized processor for your application. Frequency response and signal levels can be visually monitored in real time as parameters are adjusted. 

Features
  • DFR Automatic Feedback Reduction
  • Parametric and Graphic Equalizers
  • Cut/Shelf Equalizer
  • Compressors/Limiters
  • Automatic Gain Control
  • Gate/Downward Expander
  • Ducker
  • 2-Way Crossover
  • Subwoofer Processor
  • Splitter
  • Delay Processors
  • 2×2 Matrix Mixer
 

  • Technical Data

     

    Frequency Response 20 Hz – 20 KHz
    Dynamic range 110 dB minimum A-weighted, 20 Hz to 20 kHz
    Sampling Rate 48 kHz
    Conversion 24 bit
    Impedance Input 10 kΩ
    Impedance Output 120 Ω
    Maximum input level +24 dBu minimum
    Maximum output level +24 dBu
    +12 dBu (with 12 dB pad)
    +6 dBu (with 18 dB pad)
    Total harmonic Distortion < 0.05%, +4 dBu, 20 Hz to 20 kHz
    Propagation Delay <1.5
    Operating Voltage 100 – 240 Vac, 50/60 Hz (auto-switching), 1 A maximum
    Maximum Power Drain 45 W
    Weight 2830 g
       

  • Downloads