|
|
SCM820 Digital IntelliMix® Automatic Mixer
Eight channel, digital automatic mixer designed for use in speech applications, including sound reinforcement, broadcasting and audio recording.
|
|
Available now:
SCM820
SCM820-DAN
SCM820-DAN-DB25
SCM820-DB25
The Shure SCM820 is an 8-channel digital automatic mixer designed for use in speech applications including sound reinforcement, broadcasting, and recording. It uses proprietary IntelliMix® technology to dramatically improve audio quality in any application where many channels of microphones need to operate simultaneously. Multiple I/O configurations and networking options ensure analog and digital connectivity between devices.
|
-
NEW! Digital Feedback Reduction (Through firmware upgrade using Shure Update Utility)
-
Two channels of patented Shure DFR (Digital Feedback Reduction)
-
Assignable to input channels and mix outputs
-
Automatic feedback detection and filter deployment
-
Up to 16 filters per channel
-
25 Hz to 20 KHz bandwidth
-
Up to 18 dB gain reduction per filter
-
Selectable low/high Q filter width (1/40th or 1/70th octave)
-
“Freeze” feature locks depth and frequency of existing filters to avoid unwanted automatic changes
-
Auto-clear on power cycle or timeout returns filter settings to a pre-defined state for the next event
-
Save current settings to use later, or load preexisting setups
-
IntelliMix® Technology
-
Delivers seamless automatic mixing and reduced background noise through dynamic channel gating and attenuation
-
NAT (Noise Adaptive Threshold) continuously adjusts the activation threshold for opening a channel.
-
Number of Open Microphones Attenuation (NOMA) determines the amount of gain attenuation for a mix output when the number of active microphones changes.
-
Last Mic Lock-On (LMLO) keeps the most recently activated microphone open until another microphone is activated.
-
MaxBus ensures that only one channel is opened per sound source, reducing comb filtering for clear and intelligible speech.
-
IntelliMix® Modes offer five different mixer mode presets of reliable automixing styles (Classic, Smooth, Extreme, Custom or Manual) to quickly tailor the mix for a particular application.
-
Enhanced I/O support for greater application flexibility and digital connectivity
-
DB25 or logic-enabled block connector models available, each with 8 inputs
-
Per channel direct outputs for use as an insert to a mixing console or recording
-
Mix A and B outputs with selectable mic or line level, connect to a sound reinforcement system, mixing console, or recording device.
-
Dual mixer operation enables routing of independent automixes to the mix A and B outputs, allowing two entirely different mixes to result from the same set of inputs.
-
Aux inputs on both the front and back panel easily connect to media players
-
¼” (6.35 mm) stereo headphone output for channel solo and mix monitoring
-
Comprehensive Control
-
Channel control knobs allow quick adjustment of gain, limiter and EQ settings, and solo/mute functions on input channels
-
Output mix controls and meters enable front-panel master gain and limiter control as well as signal monitoring
-
LED meter rings display input audio or IntelliMix gain levels for each channel
-
Browser-based control software delivers comprehensive software control, monitoring, routing and configuration of all signals and settings and adds a parametric 8-band EQ
-
Advanced Networking
-
Standard Ethernet or Dante™ digital networked audio configurations available
-
Dante-equipped models enable multi-channel audio networking over Ethernet.
-
Dante Upgrade card available for standard Ethernet models
-
Link Dante-equipped SCM820s to form large automixes of up to 12 units (96 channels of audio) Control system compatible (AMX, Crestron).
|
